Home > On-Demand Archives > Talks >
Aggregating Data and Sensor Programming With The Arduino Nano 33BLE Sense Board
Dr. Don Wilcher - Watch Now - EOC 2024 - Duration: 39:36
Aggregating data from industrial or environmental systems can require costly data logging or acquisition devices. With micro-miniaturization or MEMs technologies, sensors can be populated on small form factor Printed Circuit Boards (PCBs). Included on these PCBs are System on Chip (SoC) microcontrollers. Combining sensors and SoC microcontrollers, PCBs can provide an approach to aggregating data from industrial and environmental systems.
This online conference talk will present an approach to obtaining data from industrial and environmental systems using an Arduino Nano 33 BLE Sense board, Communication Terminal software, and sensor programming techniques.
Topics to be presented for this online talk are listed next.
- Arduino Nano 33 BLE Sense Overview
- Accessing On-board Sensors
- temperature
- relative humidity
- microphone
- gesture
- Logging sensor data with Communication Terminal Software
- Tera Term
- PuTTY
- Lab: Light Sensor OLED Demonstrator (Bricolage)
Nice presentation Don. I noticed there were no pull-up resistors on the i2c signals in your schematic. Are they on the board or on the display board or internal to the processor?
Hi DaveK, thanks for the kind comments. The pull resistors for the I2C signals are on the Arduino Nano 33 BLE Sense pcb. Here is a link to obtain the electronic circuits schematic diagram for the microcontroller platform. chrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://docs.arduino.cc/resources/schematics/ABX00071-schematics.pdf